Wellntel AC Power Kit

An AC adapter rated for a wide temperature range, to power your Wellntel Sensor continuously.

What Does It Offer?

Connect to any 110V wall outlet to supply continuous power to your Wellntel Sensor.


This  110VAC - 12VDC adapter can be connected to a common household wall outlet and will supply continuous power to your Wellntel Sensor. The adapter is designed for the wide temperature swings that will be seen outdoors, but it is not watertight, and so, it should be enclosed/protected accordingly. Local wiring codes apply.

Note: Sensors powered by AC adapters will not take and store readings during common power outages, like during wind and rain storms or when the breaker in the house trips. Sensors powered by battery are not susceptible to these possible data gaps. If you still prefer to power your sensor with an AC adapter, we recommend that you set a "no readings" alert to be sent an email or text message when there has been a power interruption to the sensor.

What’s in the box?

  • AC Adapter
  • 110V AC Cord (Contact the factory for a 220V alternative)
  • Cord-grips to wire to sensor

Technical Specs

  • Input Voltage: 90-264VAC
  • Input Frequency: 47-63 Hz
  • Input Current: .4A max at 115VAC
  • Inrush Current: 15A max for 115VAC
  • Internal Fuse
  • Operating Temperature: -20C to +60C 
  • Humidity: 5-95% RH, non-condensing