Wellntel Science

Monitor static groundwater in one monitoring well.

What Does It Offer?

Monitor static water level in one monitoring well. See regional groundwater water trends as more systems come online in your region.

Wellntel Science is designed for one groundwater monitoring well of common construction. It can be mounting on an access port on a common well seal or turtle cap. Routinely collect the data using Wellntel's SensorBuddy, a free application for your PC.

*Image shows installation on a turtle cap. Sensor can also be mounted on a well-seal. Adapters included.

What’s in the box?

  • One Wellntel Sensor and the power options of your choice
  • All cords and cables.
  • Adapter
  • Tamper proof lock
  • Quick start card
  • Subscription to groundwater and private well information at my.wellntel.com

Base price: $338.00

> Start here to build your own

Step One: Select the style of wellhead you have so that we can send the correct cap or adapter.

There is an access port on my cap.

A 1/2" NPT access port is available for Wellntel.
My cap has no access port.

You'll need a cap with a port: This Wellntel compatible Turtle Cap has a 1/2" NPT access port, and can be installed in place of your existing cap on any well with a 6" casing. Make sure to specify whether your casing pipe is cast iron or PVC, in the selection box below.
*Check local electric codes for rules about disconnecting and reconnecting the pump wiring, which passes through this cap. The power to the pump MUST be off while installing, and an electrician may be required.

If you are unsure what type of wellhead you have, take a quick picture and send it to our Technical Support team at techsupport@wellntel.com. We'll get back right away with a recommendation.

Step Two: select from three power sources

Power your Wellntel Sensor using our Extreme Weather Battery Packs.
These battery packs are designed to operate in the cold winter and the hot summer. Buy one to get started, or buy two at a time, so that you will have one for back-up, and get 10% off.
Connect to any 110V wall outlet to supply continuous power to your Wellntel Sensor.
Our AC Adapter kit is rated for outdoor temperatures, but will require a nearby electrical outlet and should be installed in a water-proof enclosure, per local codes. This power source works very well if your wellhead is inside a building.
Power your Wellntel Sensor from the sun.

Not a lightweight system: this is hardened, water- and weather-proof gear hand-picked by our engineers to power your Wellntel for years.

What else might I need?

Bracket and Harness

For when there is limited space at the wellhead...

....Wellntel offers a bracket and custom harness to split the sensor and lift the brains out of the way.