• »
  • »
  • Wellntel Home Static Remote

Wellntel Home Static Remote

Monitor static groundwater in one well where Internet service is unavailable but Cellular Service is.

What Does It Offer?

Monitor static water level and set alerts for low water, pump risk and power outage for one well. See regional groundwater water trends.

Wellntel Home Static Remote is designed for one groundwater well of common construction. It can be mounted on an access port on a common well seal or turtle cap.

We also provide a complete communication base station, including cellular modem to transmit data to the cloud (monthly data charges will apply) powered by either the sun, or local line power.

*Image shows installation on a well-seal. Sensor can also be mounted on a compatible turtle cap. See options, below.

What’s in the box?

  • One Wellntel Sensor and the power option of your choice
  • A communication base station including enclosure, Gateway, cellular modem* and the power option you choose
  • All cords and cables
  • Adapter 
  • Tuning Vent (for well-seals)
  • Tamper proof lock
  • Quick start card
  • Subscription to groundwater and private well information at my.wellntel.com

* Remote systems depend on cellular airwaves for transmission. Monthly charges will apply.

Base price: $2,188.00

> Start here to build your own

Step One: Select the style of wellhead you have so that we can send the correct adapter.

Northern version with port:

The water pipe and electricity are buried below ground and your well has a vented turtle cap with a 1/2" NPT access port.
Northern Version without a port:

The water pipe and electricity are buried below ground, but your turtle cap needs a port. This Wellntel compatible Turtle Cap has a 1/2" NPT access port, and can be installed in place of your existing cap on any well with a 6" casing. Make sure to specify whether your casing pipe is cast iron or PVC, in the selection box below.
*Check local electric codes for rules about disconnecting and reconnecting the pump wiring, which passes through this cap. The power to the pump MUST be off while installing, and an electrician may be required.
Southern Version:
The water pipe and electricity exits above ground and your well has a well-seal, with an available 1/2" NPT access port. You will also need a Wellntel Tuning Vent to lift the sensor above water and electric equipment and provide ventilation without signal degradation.

If you are unsure what type of wellhead you have, take a quick picture and send it to our Technical Support team at techsupport@wellntel.com. We'll get back right away with a recommendation.

Step Two: select from two power sources

Power your Wellntel Sensor from the sun.

Not a lightweight system: this is hardened, water- and weather-proof gear hand-picked by our engineers to power your Wellntel and a remote communication base station for years.
Connect to any 110V/240V wall outlet to supply continuous power to your Wellntel Sensor and the communication base station.
Our AC Adapter kits are rated for outdoor temperatures, but will require local electrical outlet and should be installed in an water proof enclosure, per local codes.

This product requires a data plan which costs $14.80/mo to transmit data via the Verizon cellular network. When you add-to-cart and then check-out, you will be billed for the equipment you've purchased, and cellular charges will be billed monthly.

What else might I need?

Bracket and Harness

For when there is limited space at the wellhead...

....Wellntel offers a bracket and custom harness to split the sensor and lift the brains out of the way.